v1 does not require bolts and nuts
v2 requires 8mm FHCS bolts and m3 nuts
In the meantime, the stl file was uploaded incorrectly! I also checked and uploaded the v1 stl file properly.
-------------------------------------------------
This is a fidget toy that uses a 6 x 3mm magnet.
A total of 4 magnets are required
The depth of the magnet hole is 3.2mm.
Be sure to insert the magnet all the way in so that it does not get caught while moving.
Sorry, the explanation may be strange because I used a translatorš„²
The author marked this model as their own original creation.