Klicky To Purge Bucket for Voron Trident

A modified Purgebucket for the Voron Trident.
Not for regular Trident!!
For Trident with Klickyprobe removed

Klicky -> another short probe (I'm not sure)
Klicky -> Voron Tap (My Situation)

Fix the purgebucket to the XY gantry so that you can clean the nozzle at any time.

In the case of VoronTap, it loses about 3mm in the y-axis compared to the existing x-carriage, so it cleans the nozzle only with the frontmost brush as shown in the attached nozzle brush image.
But that alone is enough to clean!

I call the macro once each in printstart, printend

Brush mount and dock use original purgebucket and klickyprobe parts
Those who have used both in the past can use it by outputting only the adapter and bucket.

The dock comes in two types.
European standard using 6.3mm gap
KR2020_5mm is a Korean standard that uses a 5.3mm gap.

The height of the brush is set based on the revo_six_and_v6 of Stealth Burner. If you use a different hotend, you may need to change the length of the adapter.😔

Fixed on the XY gantry, the nozzle can be cleaned at any time regardless of the Z axis.👍

The explanation may be strange using a translator, I'm sorry🥲