RPi4 tower case (hide ALL cables) + optional SSD plug

I have a home assistant server made from RPi4 and it was quite messy with all the cables. So here is an unique case, that hides then in a way, that all come from back side.

The housing offers a bit of space for using the header pins - placing a custom PCB or fan connector.

Clearances on hooks are at least 0.15mm, larger at some paces (after optimizing)

3-part print

• PCB-SIDE
  • houses the RPi4 attached RPi holes (2,7mm). 3-7mm screws are ok. If you have longer, put washer or bugger nut on the top. See enclosure hole options for 
    • 1,5mm (for small woodscrew)
    • 1,7mm (for M2 bolt)
    • 2,3mm (for M2,5 bolt)
• FAN-SIDE
  • for 40mm fan (32mm x 32mm attachment holes). Made for M3 bolt.
  • Has 4 hooks that require tiny supports. I used new snug supports in PrusaSlicer 2.4 with paint-on-support smart fill feature.
  • Snap off the supports and you will be ready to go.
• STAND-SLIDER
  • Slides and secures the two parts and acts as a stand
  • Optional version with socket for SSD (EVOLVEO TINY M110Gbs)

I downloaded RPi4 3D model here:

• https://grabcad.com/library/raspberry-pi-4-model-b-1