Radiation shield for Xiaomi Mijia thermometer meteostation / no supports

Radiation shield or sun shield for Mijia thermometer. 

I was using this thermometer for about 1,5years outside (-10°C to 45°C) under simple PLA 3d-printed roof and it worked well (despite that it should be indoor one.) 

The roof was trapping heat, so I made adjustments to this radiation shield to use it with this thermometer. Here is a comparison on spring cloudy day:

How to use

1. Slide thermometer to the holder
2. Plug holder into the shield (the thermometer is held side-to-side by the hole diameter)
3. Secure the holder by ziptie or 2mm x 10 screw to plastic
4. Secure the whole thing with zipties to your location, in my case - balcony guardrail. 

Print

• PETG or other material suitable for outdoors
• 0,25mm layer height