Pinecil or TS100 solder tip stand/box (Fusion360)

Small box and stand for soldering tips for Pinecil or TS100. 

The case is designed for short tips (88 mm length). 

Adjustment for longer tips:

In case use have “normal” (105mm long) ones you can adjust the model in following ways. 

• adjust length parameter in fusion (one click edit), add extra 15mm.

or alternatively in Prusaslicer 

• Cut the cover in slicer and scale Z axis (+15mm) of top part (one closer to print bed). Make sure you do not scale the part where the small click pimple is.
• It may work to scale the whole cover, because there may be enough clearance on the click thing. This is not tested though. 

Design adjustments 

• Fusion 360 as well as STEP model is attached. Happy editing :)

Clearances 

• lid and base have 0.2mm clearance (0.1mm on each side) 
• hole for tips is 6mm (my tips are 5.85mm)

Print

• PLA 
• no supports 
• oriented as in 3mf project. 

How it works: