Clean clip-in divider for Ikea Samla 1 Gallon / 5L

Drop in dividers for the Ikea Samla 1 Gallon / 5 Liter storage bins (AN: 701.029.72) , cleaned up and optimized slightly. Print 2 clips, slide them over the outside edge, drop in a divider and it should pop-in to the clip. They'll stay reasonably in place, but not assured to be perfectly rock solid in all cases. The Samla lid (AN: 504.550.88) fits on top without issue.

You can use multiple dividers in a box, if you have the need.

Recommend printing the clips with a brim and support. Unless you're printing PETG on a Smooth PEI sheet and use that aggressive sticking power to your advantage.

Big fan of the original authors work and I'm all for crediting authors hard work, however there was a number embossed into the model that wasn't the authors name and didn't have a clear meaning. Text of unknown meaning makes me a little uncomfortable… it also additionally slows down the print a fair bit unnecessarily. So I removed that text and made it a clean flat top. Additionally I trimmed 10mm of height off the clips so they'd print faster.