Simagic P2000 Pedals Base Shaker Adapter

This is an adapter for cheap 25W 50mm little base shakers to fit the P2000 Simagic Pedals.

You will need:

• 1 x M5 x 12mm socket head screw (to screw into the base shaker)
• 2 x M5 x 35mm socket or button head screws and nuts (to clamp the adapter to the pedals

I have tested on my rig and the shaker clears the brake fluid reservoir when braking, but I guess it all depends on the travel you have in the pedals.

Not sure if it's just coincidence, but I had one printed out of PETG and one in PLA. The PLA one made a very different sound, more mechanical, the PETG was more dampened and deeper. So if that happens to you, just print them in PETG.