Creality K1C - Rear Betweener Plate and Front Riser
Rear betweener plate to fit the filament tube for the Creality K1C and thinner Front risers.
7
30
0
316
updated July 22, 2024
Description
PDFI found that the rear plate didn't fit the K1C due to the cable guide. So this is the rear betweener plate for the Creality K1 Riser design from Joe Cooper.
Also, I made thinner Front risers, to avoid the printer head touching the risers.
Model origin
The author remixed this model.
Differences of the remix compared to the original
I found that the rear plate didn't fit the K1C due to the cable guide. So this is the rear betweener plate for the Creality K1 Riser design from Joe Cooper.
Also, I made thinner front risers, to avoid the printer head touching the risers.
