Soldering Vise

Feature

• Jaw span 100 mm, width 50 mm, height 30mm
  - Enough size to hold small PCBs.
• Vise cap is changeable when it is damaged or worn out.
• Also you can choose the shape and material of the vise cap
   ex) flat-face, slots-face, PLA, TPU, rubber, metal, etc.
  If you want to design your own cap, refer to the attached drawing.
  A cap is secured with two M4 screws. Thread depth is 20 mm.
  • The model includes the threads but it may be better tapping through them.
• A M10x1.5 mm pitch 200 mm length Hex bolt is necessary.
  - You can try to 3D print it with attached model.
• It is stable as the vise is rather big and has some weight.
  -  If you want to clamp it to the table, you can use the three 8mm dia. and 30mm length slots.

3D Print condition (reference)

• Body: PLA, Vise cap: PLA, TPU or other materials as you like.
• Infill: 20%
• Support: Not necessary EXCEPT screw head and vise caps.
• Walls: more than or equal to 3
• Layer height: 0.2 mm
• Nozzle: 0.4 mm