QuinLED Dig Uno V3.1 Case

This is a project case I made for the QuinLED Dig Uno that provides inputs and outputs for a single WLED Strip.

Case uses a single 2.1mm Barrel Jack for easy power infeed, a 2nd 2.1mm Barrel Jack for Power Output (to inject into the end of a long string), and a female JST-SM 3-pin (standard on most addressable LED strips) to connect to the head of the strip.

IMPORTANT PRINTING NOTE: the JST-SM connector is PRINT-IN-PLACE – Ensure you a pause for the print at a the layer height just before the top of the connector hole is bridged and place the JST-SM in place, then resume the print.