quick pill box / pill magazine (7 compartments, vase mode)

A quickly printed (vase mode) pill box for a week with 7 compartments.
22
110
3
583
updated August 16, 2023

Description

PDF

This is a small pill box/magazine with seven compartments for a week. It is sized for capsule-type pills (as seen in the photo). Since it is printed in vase mode, it is a quite quick print.

The box actually has 8 sectors, but one is always open, so only 7 are usable. The center however can be used as a bonus compartment, but you need to take off the cap.

I used PLA, and sliding doesn't feel that smooth. A hint of lubrication or using another material might improve that.

Printing:

  • I used PLA, 0.4mm nozzle, 0.2mm layer height
  • vase mode, 3 bottom layers
  • print settings → advanced → extrusion width: 0.6mm
  • print settings → advanced → slice gap closing radius: 0.01mm (or less)
  • I also like bottom fill pattern: archimedean chords
  • for quicker printing: filament settings → cooling → slow down if  print time is below: 4 seconds (depends on your printer's cooling)

For advanced users: If you want to print several of these in one go, place multiple of these, space them apart so that the do not overlap in y axis direction, i.e. the front edge should begin where the previous one ends in y direction, but place the alternating left and right. They are printed in the order shown in the list to the right; make sure they are placed on the bed from front to back in that order. Then print settings → output options → complete individual objects, and also set extruder clearance height to 100mm. See this model for an example. I use the same method to print cap and box in one go.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more