Magnetic Ventilation system v10 [for Resin Printers] WIP

First and foremost, 

Thank you OnceinaSixSide!!! what a fantastic Idea!

So i planed on just making it so I could use my magnets.. I have 8x3mm on hand… but I ended up redrawing it. it is also drawn to utilize m3 button head screws.

and added a twist lock… 
Currently untested, I will double check the measurements when I have the exhaust hose, and I plan printing these and using them (for my resin printer setup). 
I will let you know if they work :D (and even what changes needed to be made).
 

***7/20/23***
Time for some changes:
 

1.) updated dimensional accuracy. (actually four inches now) 
2.) added an inline fan coupler that works with a 92mm fan (for reference)
3.) added a second magnetic base “Magnetic-Base--WallVent” -for those that want to have it around the outside of their external vent. so the hose is easily removable from both sides.

I've included the .f3d file for those ambitious enough to modify it to their need. 

 

***7/22/23***
I printed some of the parts (PETG). see photos. 

they fit perfectly on the fan and the pipe. 
I used 8x m4 x 12 mm socket  cap screws with a nut and a washer to put it all together. 

works well! 

Enjoy!