Fastenal storage bin inserts

I bought a bunch of these Fastenal/TruForce 0569279 4.125" x 5.325" x 3" storage bins but forgot to get inserts to separate out small parts. So I designed inserts to fit.

These two inserts are not intended to be used together in the same bin. Use one or the other. I may update the models with notches to allow interlocking the two inserts at a later time or feel free to remix.

The inserts are approximately 1.25" high. You can scale the y-axis to make them a bit taller but if you go too tall, the fitment will be off since the interior of the bin has no right-angles.

Print instructions

Unassociated tags: storage bin

Category: Tool Holders & Boxes Summary

I bought a bunch of these Fastenal/TruForce 0569279 4.125" x 5.325" x 3" storage bins but forgot to get inserts to separate out small parts. So I designed inserts to fit.

These two inserts are not intended to be used together in the same bin. Use one or the other. I may update the models with notches to allow interlocking the two inserts at a later time or feel free to remix.

The inserts are approximately 1.25" high. You can scale the y-axis to make them a bit taller but if you go too tall, the fitment will be off since the interior of the bin has no right-angles.

Print Settings

Printer: Prusa Mk2s

Rafts: No

Supports: No

Resolution: 0.25mm

Infill: 20%