Curtain hook with a lock that can be used as a replacement for hooks from the discontinued IKEA Kvartal curtain…
57m
2× print file
0.10 mm
0.40 mm
3.00 g
27
198
1
1022
updated May 31, 2020

Description

PDF

Curtain hook with a lock that can be used as a replacement for hooks from the discontinued IKEA Kvartal curtain system, as it fits into the Kvartal gliders.

As the original hooks I used had seemingly quite low UV resistance, most of them broke at one single spot after few years of usage (see on the pictures). Unfortunately, by that time, there were no replacements on the market, so as usually, 3D printer came to the rescue...

Print instructions

Both 3mf for a 12pcs batch and stl for a single hook is attached.

As the hook is quite small, I recommend printing with detailed settings. I had good results with 0.4 mm extruder and 0.1mm layers.

UV-resistant filaments such as PET-G are recommended.

Tags



Model origin

The author hasn't provided the model origin yet.

License