SSD, HDD 2.5" Harddrive Enclosure

This is one of my first builds in Onshape. Was meant for a Case replacement for an Outdated, but still functional HDD Adapter. Can be modified in Onshape, maybe in some other 3D Modeling Software like Fusion 360 as well.

Printed on a Ender 3 with the following settings:

• PLA
• Print Temp. 200° C
• Heatbedtemp. 50°C
• Infill 20%
• Simple Support (for Cable Opening), might work without….

You also need 4x M4x10 Screws for assembly.