SplitKB Kyria Faceplates

These faceplates are designed to replace your top plate if you want to change the colour over the stock top plates. Print this with at least 75% infill, preferably 100% infill. Enable ironing or print with a satin sheet for a nice top finish (when you flip it over). 

You will need to print 2 for your splitkb use the prusaslicer functionality to mirror for each hand. 

Included are 2 options. One with all 1u slots for switches, this is so that if you don't want to go 2u on the wings you get additional stability on the individual switches instead of the span hole alone. 

The other has an encoder hole for if you want to use an encoder in the default ‘thumb’ position.

Coming Soon: I'll add some more plates with the encoder in the other two locations that it can be.