Adimlab Extruder Cable Tie Bracket

This is a bracket to put on the top of the extruder assembly so that cable chain and fan wires can be zip tied on the…
0
3
0
72
updated April 30, 2022

Description

PDF

This is a bracket to put on the top of the extruder assembly so that cable chain and fan wires can be zip tied on the Adimlab printer.

Uses two 3mm x 8 scews and two 3mm nuts.

You will need to remove the cable chain put this bracket on and then put the cable chain back on. It's a little tricky, I used tweezers to hold onto the cable chain nuts to install them.

Category: 3D Printer Parts

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License