Filament Waste Bag (Hanging)

I needed something to manage my filament waste but could not find something suitable, so I decided to design something myself. I use +/-20 liter waste bags and you can simply replace it when full. (…other sizes will probably also work fine)

I advise to use supports for the top part. If possible only on the 2 pins (Filament_Waste_Basket_Top_v2)

Update 3-Jun-22: I have rounded the endings on the top-part as commented by Denny77 so it won't pinch the surface it is mounted on (Filament_Waste_Basket_Top_v2). 

The bottom part will print fine without support.

I printed this in PETG, 0.2mm layer height, 15% infill.

Total print time approx. 7 hours.