PROJECT INFO
------------------------------
I had someone approach me to design a body cap for the Pentax auto 110 camera, since originals are somewhat hard to come by, and I've decided to share it for anyone else who might need one. Yeah, this should also work for the “Super” version of the camera too.
There is an alignment dot, so you know the position to start when placing this on the body, so keep a look out for it and If you feel like going the extra mile, put a dab of paint in there! I did, and it works great and is super east to see.
Obviously this is being offered for download so that people can print them for themselves (if you do, please let me know! Oh, and consider tipping too, even if not required!), but if you would like me to print them for you, I'd be happy to for a reasonable price. Just message or email me.
To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)
PRINT SETTINGS
------------------------------
Printer:
Any (I used a Qidi X-one2)
Resolution (Layer height):
0.1mm
Line width:
0.35mm - 0.4mm (Anywhere in this range)
Print speed:
35mm/sec
Minimum layer time:
20sec
Rafts:
None
Supports:
No
Brim:
No
Infill:
N/A
Filament brand:
Any brand should work fine
Filament color:
Any
Filament material:
PLA
Nozzle temp:
205°C
Bed temp:
55°C
The author hasn't provided the model origin yet.