Mirka Deros Bracket

This is a bracket to hang the Mirka Deros on the wall and it's not damaging it's sanding disc.

You'll need for example two countersunk wood screws 5 x 70 like this to mount it to a beam:
HECO-TOPIX-plus 5,0 x 70, countersunk head, HECO-Drive, VFT, A3K

In this case 25 mm of the Screw is outside of the bracket.

Dimensions

Height 118,5 mm
Width 85 mm
Depth 55 mm

Print Settings

Nozzle = 0.6 mm
Layer Height = 0.25 mm
Perimeters = 3
Generate Support Material = Yes
Support Style = Organic
Material PETG

Filament usage = 102 g
Time = 2 h 37 min.

You can use the STEP files with the Prusa Slicer directly.