Playing Card Box

This box was design in Fusion as part of the “Fusion 360 in 30 Days” course.

I have added some embossing and other elements to suit. It fits a standard pack of playing cards with room to spare.

It's print in place for the hinge.

Printing Settings:
Filament: Hyper PLA - 225C 
Bed Temp: 60C
Layer Height: 0.16mm 
Other: No brim. The brim can impact the effect of the shallow embossing.

NOTE: the retaining ‘bump’ can be a little stiff to start with, but will loosen with a little use.

There are 3 sizes.

Original - 64x90x24mm 
1 Pack - Single Deck - 64 x 90 x 18 mm
2 Pack - Double Decks - 64 x 90 x 35 mm