Low Poly Bowls (Remixed)

Three different low poly bowls.

The sizes are:

• Small     – ~ 190mm Diameter x 26.4mm Height (Green Bowl in Pictures)
• Medium – ~ 207mm Diameter x ~ 60 mm Height (Gray Bowl in Pictures)
• Big         –  ~ 264 mm Diameter x ~ 50 mm Height (Red Bowl in Pictures)

Print them without infill (0%) and without top layer. I use a wall thickness of 1.2 to 1.6 mm (3 or 4 perimeters) and 5 bottom layers. Prints very fast even with standard printers. 

Adapted openSCAD code to make them into suitable low poly bowls.