Onewheel XR Surge Fender

Use 1" wide velcro straps to attach the cylindrical objects of your choice 
(drink bottles, bluetooth speakers, etc) to your ride. Printed buckles hold 
the three sections together. The risers add another 2.4mm of tire clearance
if necessary.

Please note that when printed in PLA+, the fender will not survive more than
mild impacts. It will be much stronger when printed in nylon CF/GF.

The included .3MF file should be used with BambuStudio or OrcaSlicer, and
the STL files are pre-rotated to the parts' recommended print orientations.

Suggested print settings:
3-8 walls
15-20% infill
no supports except for the buckle

Credits: the buckle design was inspired/stolen from the Enduro Fender model 
by aMakerKev on Thingiverse. [https://www.thingiverse.com/thing:5569928]