Galvatronus Cannon for Eris Lunacyte

I wasn't satisfied with the stock cannon barrel on MMC's Eris Lunacyte.

So I modelled my own!  Fatter, longer, more threatening!  (hmm… hope I don't need the “for adults only” box checked!)

Printed with a very old spool of translucent orange PETG, using a .6mm nozzle, .1mm layer height, and no supports.  Fairly slow, low fan, and boost the flowrate a little will enhance translucency.  The ‘tab’ of the base is the top/front, so run the seam up the opposite side.

Also looks good in purple!

The original cannon body is glued at the pins - I used a scalpel blade in the seam, worked it around to loosen things up.  Eventually a small ‘crack’ noise happened and it came loose.  Holds together fine without glue now.  Be careful, YMMV.