Cylindric Lampshade

Thank you for supporting me!

This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!

Design

This is a lampshade I have created to replace the original lampshades of two bedroom lights.

Printing instructions:

• decide whether you need the version with a deep mount or a flat mount. The deep mount can be used both ways - to higher or to lower the shade against the bulb socket.
• print Shade, TopFrame, BottomFrame, and either Flat- or DeepMount
• for the Shade, use your slicer's vase mode
• other parts go standard with e.g. 25% infill
• I have used a 0.4mm nozzle and 0.2mm layer height
• no supports required

Assembling instructions:

• glue both the top and bottom frames to the shade; take care the shade is going slightly into the frames' groove
• snap the bottom frame to the mount part selected

Off-topic:

In case you are interested in electronics and want to know how to “smartify” a lamp like this - here are the instructions: Harry's Smart Lamp