Mega-Sized Brick Final Duel II Set (5:1 Scale)

This is a set of blocks that can be used to recreate the Final Duel II Set from 2002 at 500% scale.  This is our second post from this set which contains all the blocks to build the set itself along with the parts for the Luke Skywalker figure.  The parts to create the Storm Trooper and Imperial Officer can be found here

The stl files for the parts have all been organized into folders to make them easier to find. 

Please use the following table to assist with colors and quantities when printing the various model parts:

Once you have all the parts printed, the instructions to build this set can be found in the docs folder.

For those with Bambu printers, there are two Bambu project files located in the “Bambu 3mf Files” folder to simplify things even further.  These files contain the parts in an ideal orientation for printing.  Some of the parts would benefit from being cut in the slicer before printing.  Those modifications are included in these files as well. Note that you will need BambuStudio to open or work with these files.

The Luke Skywalker figure in this set was remixed from the Brick Megafigure published by Julia Ebert.  The only changes made to the original design are:

• All parts were scaled down 50% to work with other models we've published at a 5:1 scale from original Lego parts
• A modified torso which includes cavities to hold the torso sticker parts provided with this design (the sticker parts will need to be glued in place at these locations).
• The waist parts were modified slightly to make them easier to assemble.
• At 50% scale, the pins were difficult to work with (and really not needed) so these were removed from the print list (Glue was still used to attach the connectors to their respective parts)
• Modified the hands to print with their connectors attached (This will require supports but eliminates the need to glue these pieces).

The basic instructions for assembling the figure can be found in Julia's post here.  This is a fantastic model that's easy to print and assemble.  Special thanks to Julia for sharing this work!

All the parts needed to build this set were taken from thal72's Printables profile and scaled to 500%. He has a massive library of brick parts available at this location.  If you wish to do any additional customization to this set, this is a fantastic resource to find additional parts.  Special thanks to him as well for sharing this work!

The Light saber used in this make was created by Printmajstr and was scaled to work with the rest of this set.  Thanks also to Printnajstr for sharing this work!

A couple more things to point out for those wishing to build this set:  

• The original design calls for a 6x8 plate in dark gray as the base for this set. This block is too big to fit on the print bed of the Bambu P1P.  To get around this, we chose to use two 4x6 plates and orient them to a 6x8 configuration instead.  In order to support things, we added a few additional blocks (two 3004, and one 3003) under the seam as shown in one of the pics.
• The giant arch (part 30528) was also too large to fit on the p1p build plate at 500% scale.  This block was cut into 4 parts as shown in one of the bambu project files to get around this.  The original part is included at 500% scale in the stl files folder.  Feel free to modify this to meet your needs when printing.

If you decide to print this, we'd love to see it.  Please post pics of your makes, and please consider liking this design by clicking the "like" link above.

Happy Building!!

See Description for a list of modifications