Women Skull (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA White Transmission Distance: 5
 

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.

Note:

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

Feel free to share your impressions of this model
 

hueforge