Captain America Coaster Remix for single-extruder printers

I loved SJThreeD's original design. I also printed the Hulk and Spiderman coasters found on their page.  https://www.printables.com/@SJThreeD

Used post-processing cura to change filaments twice during the print.  I did I high layer height (.3) and did filament changes at layers 13 (white to red) and 15 (red to blue).

The blue field for the star sticks up higher than anything else.  This may not be best for putting some glasses on this coaster.

i also printed this one with a lot of leftover filament and didn’t quite have the right shade of blue to match the mcu cap shield

I loved SJThreeD's original design. I also printed the Hulk and Spiderman coasters found on their page.  https://www.printables.com/@SJThreeD

Levi Sittis remixed all of the marvel coasters to provide separate stl files for each color.

I rearranged the levels from Sittis' version of the Captain America coaster to allow my printer to print the entire coaster using one extruder, stopping, using post-processing cura to change filaments twice during the print.

Now the blue field around the star is the highest layer, and the white stripe in the shield is even with the star.