Hand Terminal Prop from The Expanse

A replica of the prop hand terminal used in The Expanse series.
4
11
0
85
updated January 28, 2025

Description

PDF

I created this after seeing a few other attempts that didn't quite do it for me. This is meant to be a simple design. 

Parts:

Print one of each of the included .stl files. There should be a base, back, front and electronics piece. I print them in PLA except for the base. I use TPU with a 50% infill and supports with the piece aligned vertically.

Acrylic, or similar material, for the “screen”. Cut to fit the width of the base piece. 74mm x 112mm

2 LED's (Red for Mars, Yellow for Belters, and Blue for Earth/UN)

1 CR2032 coin cell battery

I also included an image that I created with the idea of getting it printed on acetate. They did this in the show for devices in the background. 

I have a playlist of videos if you need help assembling.

https://www.youtube.com/playlist?list=PL9PAT9oZoW9sp-nqb236L6h2yHZ6fCRsI

Tags



Model origin

The author marked this model as their own original creation.

License