Table Laptop Stand

Hi there,

Download and print this laptop stand, you wont regret it :)

Jokes aside. I really liked the model from VictorProst here on Printables. I wanted the distance between the two legs being a bit longer so i started printing that. Then i was thinking the flex between the two legs was flexing a bit much for my liking. So I decided to draw it from the bottom, its a bit thinner and needs 2 connectors instead.

So you need to print 2 connectors, in the distance of your liking. The model pictures have a distance between the legs of 295mm and can be printed on a Bambu Lab P1P/A1. And the two legs.

I printed it with 12% infill and a bit more infill at the connector holes.

Thanks to Victor for the idea.

Stay safe <3

I have made some changes to the design by VictorProst. I wanted to have a connector in the top, so i decided to draw it from the bottom taking the idea of a connector from VictorProst, and just following VictorProst's design as a reference because the printed version of his felt pretty good, it just flexed a bit too much for my liking between them.

I have also added a lot of connector lengths so you can get it to match your laptop a bit better if you want that. I wanted that so the fans under had some more air, and it just felt like a better match for my 15" laptop.