Customizable card box flip

Customizable flipbox to store playing cards or collected cards. You can change the inside diameters to your liking using openscad, or use the online customizer, but you can also have a slanted outside of the box or not. Hit customize to create your own version!

The hinge works with a piece of filament. Just cut of a piece and thread it through the holes when the box is assembled. Friction of the spoolcurvature in the filament should keep it in place, but you can always use a lighter to burn/blob the ends of the piece of filament carefully, after it is in place.

I have not added the text option on the outside yet, because this is easily done in your slicer of choice with the customizability you like. There are however some example stls/3mfs with text on the bottom of the box.

Example sizes for some popular card games (leave the width and height default, set the depth accordingly), which I have also added stl's for:

• Regular playing cards: 20mm
• Uno (flip): 34mm
• Phase 10: 35mm
• Skip-Bo: 50mm
• The Mind: 43mm
• Blink: 23mm

If you have instruction papers with the game, rule of thumb is to add 12mm to the depth of the case, so you can fit it in there as well.