Wera countersink and tap combination set

Combines Wera 846/8 and Wera 844/7 into a single, more compact tool set.

Frees up one hinged box, perfect to use for other tools like my 4mm bitset.

Assembly:

It is necessary to remove some plastic from the inside of the box, easiest done with flush cutters. Place the bottom part into the box and see if it fits, otherwise you might need to remove more plastic.

Once it fits, glue the bottom part into place and populate it with the bits.

Now you can place the remaining lid pieces on top, they should slot nicely into place. Try to close the lid and see if everything fits, otherwise there might be some more plastic to remove from the lid.

When the box closes fully, you can put some glue onto the lid pieces and close the box to glue them in place.