Battery Wall Control / Pegboard Mount Holder for Ryobi USB

A pegboard or wall mounted battery holder for 2x Ryobi USB lithium batteries.  Has a little opening for plugging in the charging cable so you can both store and charge your batteries with it.

This should work with Wall Control or any standard 0.25" pattern pegboard as well.  You could also simply mount them to any wall or other hard surface with the appropriate hardware.

Hardware

Designed for use with these well nuts: https://www.amazon.com/gp/product/B08LCRBS4S
Stock of these is kind of in and out and if you're interested definitely contact https://worthytools.com/ to express your interest.

Use #6-32*1"L bolts for mounting.  You can potentially use longer bolts if you have your pegboard installed further away from the wall behind it.
https://www.ebay.com/itm/154145272749

 Well Nuts Update 12/31/2025
I have finally located a suitable supplier for mounting these to Wall Control and will sell them here:
https://www.ebay.com/itm/147064927166
Note that these will not grip properly onto standard wood Pegboard.  The brass threaded insert is a bit too thick and doesn't allow for gripping onto thicker panels, but they are perfect for thin sheet metal such as Wall Control.  For Pegboard you can potentially use the 1" or so long well nuts from McMaster, but this will then require that you have your Pegboard some distance away from the wall so you're not screwing into it.

Get 25% off CA Filament by using the following link:  http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D