Wifi dongle USB cable extension lock

Parts and tools required : 

• Thumbscrew
• Glue
• Drill bit (depending on application)

NOTES : 
-The holes likely need to be resized for your own applications. 
(I didnt wish to mess around with tolerances since I am not that experienced with my own machine so I have made the dongle side hole 2mm, and the cable side hole 4mm in diameter.) For the computer ATX screw I used a 3mm drill bit to bore out the hole and added a tiny bit of lithium grease to the screw when threading it in for the first time.

Tips for putting it together : firstly fit everything together with the screw and snug it up, then apply superglue onto the mating surfaces and then put it onto the two parts.
If you dont feel like holding onto it while the glue dries just use clamps if you have them.