Ikea Mala Easel Foot

After having new flooring, we needed to protect it from the feet of an Ikea Mala easel. I quickly designed these in Tinkercad.

They are printed in TPU and I used the following settings :-

Orientation - as in the STL file

Infill - I used Cubic Subdivision and 40% to give the part sufficient strength.

Adhesion - Brim to make sure the part stayed on the bed during print. This can be easily trimmed off with cutters.

Layer height - 0.2mm

Wall line count - 2

It is designed to be a snug fit and holds onto the leg via friction.