sovol sv08 Y axis endstop
Create a Y-axis endstop.
I connect to the probe pressure pin of the board because I use Klicky and don't need that.
7
42
0
504
updated
September 6, 2024
Description
PDFprinted in ASA, with 3 walls, 3 layers top and bottom, 15% infill
easy to print and install
2 m2x12 screws with nuts
I connect to the probe pressure pin of the board, because I use Klicky and don't need that.
The pin in the board in the PE12.
On printer.cfg
In section y stepper
endstop_pin: PE12
and comment the rest or erase
Model origin
The author marked this model as their own original creation.
