CREALITY K1 MAX RAISER / LID EXTENSION / RISER / TOP COVER / UPGRADE (VERSION 1)

Introducing the Ultimate Lid Extension for Your CREALITY K1 MAX 3D Printer! (no supports needed)
 

Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 MAX printer, designed to elevate your printing projects to the next level.

After the many requests to design a raiser for the K1 MAX, we complied and thought about how we could realise the raiser for the K1 Max.

As with our raiser for the K1 & K1C, there will be several versions. This is version 1, version 2 will be released in the near future.

We'll post the printed raiser later as a picture and video in the "Makes" section.

★ OUR STL FILES OFFERS YOU:

• Perfect Fit on Creality K1 MAX
• Enhanced Functionality
• Improved Print Quality
• Easy Installation
• Noise reduction
• More moving space for the Bowden tube
• The glass holder makes it easy to work on the extruder or change the filament
• Air supply regulation & indirect control of the temperature
• Bowden tube passage to the back and side (you can choose)
• Detailed assembly instructions are supplied as a download
• Detailed print settings are supplied as a download
   

★ THE FOLLOWING PARTS MUST BE PRINTED:

• PART_RAISER_K1-MAX (3 times)
• PART_BACK-RIGHT_RAISER_K1-MAX (1 time)
• GLASS_HOLDER_K1-MAX (1 times)
• SLIDER_K1-MAX (8 times)
• SLIDING-CONTROLLER_WITHOUT_LOGO_K1-MAX (8 times) or SLIDING-CONTROLLER_WITH_LOGO_K1-MAX (8 times)
• PLUG (1-2 times)
• PLUG_WITH_HOLDER (1 time)

★ PRINT SETTINGS
(Please read the INSTRUCTIONS and the PRINT SETTINGS)

• Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
• Nozzle: 0.4mm
• Infill: 15% (Gyroid or Grid)
• Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer height)
• Walls: 2
• Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)
• Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)
   

★ TAKE A LOOK AT OUR OTHER SUITABLE UPGRADES:

• RAISER FOR K1 / K1C (VERSION 1) --> https://www.printables.com/de/model/923202-creality-k1-k1c-raiser-lid-extension-riser-top-cov
• RAISER FOR K1 / K1C (VERSION 2) --> https://www.printables.com/de/model/923248-creality-k1-k1c-raiser-lid-extension-riser-top-cov

If you have any questions feel free to contact us. You can contact us under the following email:

• [email protected]
   

We are happy about every new follower.