Modular LED strip clips for 2020 extrusion
Modular clips to mount 8mm LED strip to 2020 extrusion with a ~6.3mm gap, but with a thinner baffle
7
25
0
221
updated September 4, 2024
Summary
PDFModular clips to mount 8mm LED strip to 2020 extrusion with a ~6.3mm gap, but with a thinner baffle
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The originals (both Eddie's and the life-saver one on printables that actually fits the newer LDO kits) have very thick baffling. This makes more sense for spaced out LEDs, but for COB LEDs that have a higher density I didn't want to be blocking out a ton of light.
I reduced the baffling from 3mm to 1mm, keeping the chamfered edge. You could achieve more or less the same result by cutting this in the splicer but I liked the feel of the chamfered edge so here we are. This thinnest does make them feel a little flimsier but they still hold fine.
The comparison photos are to Eddie's version but both have the same baffle thickness
