Réparation de la boule du pommeau de levier de vitesse de ma Citroën Berlingo 2.
Je ne voulais pas changer la partie basse qui est encore en état. J'ai préféré retirer tout le caoutchouc de la boule, ainsi que le poids en métal, afin de refaire une boule simple à installer et à changer en fonction de son humeur.
J'ai retiré les bouts pour mettre à nu le haut du levier de vitesse :
Voilà c'est propre :
On peut embouter la nouvelle boule imprimée :
Remontage dans la voiture :
Impression en PETG en couche de 0.2 (buse 0.4) avec un remplissage Gyroid 20%, 4 parois. J'ai activé la surface irrégulière dans le slicer afin d'avoir un aspect moins lisse à l'extérieur de la nouvelle boule.
Si vous préférez changer tout le haut du levier, il y a un modèle compatible sur https://www.thingiverse.com/thing:6419830
====
Repair of the gear knob ball of my Citroën Berlingo 2.
I didn't want to change the lower part which is still in good condition. I preferred to remove all the rubber from the ball, as well as the metal weight, in order to remake a ball that is easy to install and change depending on your mood.
Printed in PETG in 0.2 layer (0.4 nozzle) with a 20% Gyroid filling, 4 walls. I activated the irregular surface in the slicer in order to have a less smooth appearance on the outside of the new ball.
If you prefer to change the entire top of the lever, there is a compatible model at https://www.thingiverse.com/thing:6419830
The author marked this model as their own original creation.