Edward Scissorhands - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 154.79x193.49mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Basico Control3D Black Transmission Distance: 1.6
PLA Sunlu Meta Grey Transmission Distance: 3.5
PLA Overture Matte Light Gray Transmission Distance: 0.3
PLA Prusament Vanilla White Transmission Distance: 1.2
PLA Basico Control3D White Transmission Distance: 1.2
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #16 (1.36mm) swap to Light Gray
At layer #20 (1.68mm) swap to Vanilla White
At layer #25 (2.08mm) swap to White for the rest.