Wall Mount for Bicycle (Horizontal)

This model is heavily inspired by the existing models on printables with a similar idea: https://www.printables.com/model/888655-bike-wall-mount https://www.printables.com/model/701598-bike-wall-mount-mtb-tires https://www.printables.com/model/741848-gravel-or-race-bike-wall-mount https://www.printables.com/model/963606-road-bike-wall-mount-rennrad-wandhalterung https://www.printables.com/model/499062-bike-wall-mount

I think all of these models have merit, but I wasn't 100% happy with them, so I designed my own. The pedal is what holds the bike up against the wall. Mine have 3 screw holes in each part, and when printed in the correct orientation (all parts should be printed with PETG or ASA and on their side) they seem to be plenty strong.

Correct Print orientation above.

Definitely a two person job to properly position and mount them on the wall. Definitely use drywall anchors (I used 15 lbs ones). This design is not great for ease of mounting, you will need a long skinny skewer to mark the wall where you will be drilling the dry wall anchor hole. You will also need long drill bits for screwing in the bottom screws on the tire shelves. 

I think I might revise this in the future using a french cleat to mount them instead of screwing through the entire piece.