Funny Toothpick Dispenser

Funny Toothpick Dispenser.

For optional working is needed round toothpicks cca (6.5mm x 2mm or shorter).

Holds over 500 toothpicks :D

Manual is not needed, but if someone will have problem I can help, or create one :D

So Enjoy

Print Setting:

Overall it is easy print but,

use 3MF File! or at least use setting from 3MF File! 

Can be printed on A1 Mini, yes, but please use setting from 3MF File!

You can print from PLA, and PETG but ABS can be to hardcore for this, if you dont worry any bending, Than yes, ABS can be.

Support are only on two parts, and they are little, and can be remove very easily.

Happy printing

Dispenser Is base of old Toothpick Dispenser from printables,

this one have bigger load ramp, also bigger space for Toothpick to fall off from storage, and differend dispenser Roller for easy use.

Next is storage which is split to two parts for better printing (also different colors can be plus).

Don´t mention of face and hair.