Angled Filament Feedthrough Remix

This was the original description ronsprenkels had for his model:

My take on a angled filament feedthrough for my filament drybox. I printed a few others that are available here, none were completely to my liking. So I took the opportunity to practice my fusion 360 skills a bit more.

• It takes a bowden connector with M10 thread (1mm apart). Thread length: 6 mm.
• It uses two M3 bolts / nuts; the bolt heads are tapered ones -> fit flush with the surface
• The fusion 360 source file is included -> adapt to your liking, e.g. for different style or dimension bolts etc.

I modified the original model on the first extrusion sketch to round up the flange so to save time and material.