Gridfinity tape dispenser (w. metal cutter)
Description
PDFno difference from the originals
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
After reading others reviews, I realized the printed teeth may be a problem, I was just using my packing tape dispenser and was struck by inspiration!
Changes
Removed the plastic teeth, and added 2 holes to mount a metal blade - salvaged from a Scotch-brand disposable dispenser like this one:
https://www.amazon.ca/Scotch-Heavy-Packaging-Inches-142/dp/B003W0P2SA
I mounted the blade with 2 rando plastic screws I found on my desk (origin unknown). Should fit a M2 screw…? max depth 10mm… may need to ream out the holes with a tiny bit first.
Disassembly
The plastic “rivets” are easily cut (behind the blade, for less crimson-leaky band-aid requiring goodness). Once removed, the blade can be cut in half to make 2 tape dispensers. DO NOT USE your nice flush-cutters to do this! A Dremel, or linesman's pliers works well.
Original Model (by @MachoThick):
https://www.printables.com/model/234669-gridfinity-tape-dispenser
Remix this is based off of (by @doragasu_917951):
https://www.printables.com/model/785260-gridfinity-tape-dispenser-25-mm-hole
