Hueforge_ONE PIECE_Monkey D. Luffy

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Charcoal
At layer #18 (1.52mm) swap to Blue Gray
At layer #29 (2.4mm) swap to Lemon Yellow
At layer #33 (2.72mm) swap to Jade White for the rest.