IKEA Kallax Gridfinity Drawer Baseplates

Overview

Yet another set of Gridfinity baseplate inserts for the IKEA Kallax drawers.

Existing work includes excellent models from JacenToth, scorf,  Alex_235390, and others.

Variations in this model include:

• Shifts bins to the left side of the drawer rather than centering them. This puts the residual width in a single 24mm section on the right rather than 12mm on each side. For me this is more functional as a place to store long or thin items (rulers, deck of cards, etc..)
• Adds 1mm padding to the front to keep bins from rubbing against the screw that fastens the drawer pull

Printing 

• Printed on MK4 with Input Shaper profile and 0.6mm nozzle
• Print setting 0.20mm Structural with 15% gyroid infill
• Filament was Fillamentum PLA in Concrete Gray using built-in preset
• No supports are required

Credits

Baseplates created in Fusion 360 using the outstanding Gridfinity Generator Plugin