This is my version of the Tension Block by Tension Climbing (https://tensionclimbing.com/product/the-block-2/).
From my testing, I have managed to hang 25kg from the pinch block without any cracking or deforming, for the strongest print I recommend printing so that the side that says "Designed by tension climbing, Modified by IJY" faces upwards and you will just need some support for the two finger pocket and the filleted edges that face the build plate.
For the rope, I use a 6mm accessory cord from Decathalon but I designed the holes to be big enough to use retired climbing rope without any issues.
The author marked this model as their own original creation.
