Filament Labels for Python Enclosure

There are 2 versions of the Filament Labels, 1 using 3x3mm magnets and the other uses the same as the Holder 6x3mm.

I created these to replace the Python Enclosure Seals.  I used the slicer to “cut” the parts, then using TinkerCad I added the holes for 3 and 6mm magnets.

The lettering is embedded in the 1st layer.  Use slicer’s “Color Painting” feature to fill in the lettering.

If you need a different than one the 7 provided; ABS, ASA, PLA, PLA Silk, PETG, TPU and Blank.  These are the settings, fonts from font.google.com.

Filament Font Settings:

2-Line Font Settings:

Holder Font Settings:

To install the magnets, I used the “Magnet Applicator”.  Verified that the “Label” part was attracted to the “Holder” then tapped them in with a 3mm driver.

Magnet Applicator by peteb: https://makerworld.com/en/models/165335?from=search#profileId-181555

Remix of cutout seal