Enclosure Feed Thur

during COVID I couldn't get an IKEA LACK table so I built something similar from scrap wood in the shop.  I drilled a sloppy hole that split the plywood because I did not put a backing plate when I drilled.  So I made this feed through to hide the worst of the splintered hole.

Provides a smooth filament feed from the filament holder to the printer part of the enclosure.

My PETG print benefited from cleaning up the threads with a 8x1.25 tap and die.

The heat from the printer helps warm the filament's enclosure and reduces the moisture in the filament as opposed to just open room air.