AtomRC Dolphin nose mount and cones

AtomRC Dolphin mounting system which interfaces between the balsa insert and foam, providing 3 x M3 6mm mounting holes.

The greater goal is to have an aerodynamic mounting system to affix to the empennage which provides a universal mounting system for different interchangeable noses.

There is also a sample nose cone. It has good aerodynamic characteristics, but it does not ventilate the VTX I have in the front compartment well, and it is probably thicker and stronger than needed in retrospect. I will probably try cutting it straight off coronally to open up airflow and reduce weight, but will probably redesign it. This is unmodified PETG rather than foaming PLA as well.

Not clear if you need support, I used it initially because I was almost out of filament and didn't want to risk it.

See the ongoing build, models, and Ardupilot/Radiomaster Boxer/Avatar HD programming at https://github.com/whitehaven/wild-harp-build